« previous next »
Pages: [1]

Author Topic: Venox 250 starter won’t turn  (Read 1578 times)

Fishhunter

  • Newbie
  • *
  • Posts: 2
    • View Profile
Venox 250 starter won’t turn
« on: April 15, 2019, 03:36:17 AM »
Hello I’m new to this site and have purchased my first motorcycle which is a 2005 venox 250 which has around 1200 miles. The problem is the motorcycle won’t start. I have put in a new starter relay, new battery, took starter out bench tested worked no issues. The brushes look brand new. Press starter button and relay clicks. But starter won’t turn. The side stand is up, bike in neutral, engine kill switch is turned on and it will click once at relay but that is it. I’m really lost on this and any help would be appreciated.
Logged

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7722
  • West Tennessee, USA
    • View Profile
Re: Venox 250 starter won’t turn
« Reply #1 on: April 15, 2019, 02:27:45 PM »
Do you have a multimeter?
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Fishhunter

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Venox 250 starter won’t turn
« Reply #2 on: April 16, 2019, 10:41:49 AM »
Yes I do have a multimeter. Update I went and checked the cables. Went to try and start the relay clicked and then almost immediately both cables on the battery post started to smoke.
Logged

dj103086

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Venox 250 starter won’t turn
« Reply #3 on: August 09, 2019, 08:10:32 PM »
I have a 2007 kymco venox and had a very similar issue.  Ultimatley after constant checking of wire connections and switches I ended up replacing the starter relay and it worked perfect.  don't know why could not explain.  but I have not had any issues since then.  knock on wood. 
Logged

An Error Has Occurred!

Call to undefined function split()
Back