1
Agility 50 / 1500 torque spring 2000 clutch springs 5.5 roller weights??
« on: May 22, 2013, 07:54:45 AM »
I put in 1500 torque spring 2000 clutch springs 5.5 roller weights?? Is the 2000 rpm clutch springs to much???
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Agility 50 / 1500 torque spring length and problems!!
« on: May 16, 2013, 10:57:11 PM »
I just purchased a 1500 naraku torque spring and went to install and can't get the belt back on! So I took it back off and measured the new spring from the stock and the new one is 4in and the old one 3 and 5/8! Is this a problem it said it was for a kymco 50. Also I went and put the origanal back on and it was extremely hard to get the belt back on!
3
Agility 50 / Roller weight size 16/13 is correct yes or no?
« on: May 03, 2013, 02:10:13 AM »
I'm ordering roller weights is 16/13 correct?
4
Agility 50 / 2013 CDI box cut and it was a succes!!!!
« on: May 03, 2013, 02:09:01 AM »
2013 CDI are restrictid I cut the right corner until I hit the little green wire!! Thanks to the right up on the forum! Got 5-7 MPH faster!
5
Agility 50 / variator Naraku 5.5g - Kymco 4T
« on: November 02, 2012, 12:58:19 AM »
I am giong to buy 5.5 weights so would this be a better varaitor then the stock one. I would only be paying 15$ more with a varaitor. But if this one isn't giong to make a differance I will just order weights
http://www.racingplanetusa.com/variator-naraku-kymco-honda-dealim-139qmbqma-p-4330-1.html?cPath=2_15382_15386&sessID=00cbafe583fdb43956708df085342cc8
http://www.racingplanetusa.com/variator-naraku-kymco-honda-dealim-139qmbqma-p-4330-1.html?cPath=2_15382_15386&sessID=00cbafe583fdb43956708df085342cc8
6
Agility 50 / Cdi box
« on: October 28, 2012, 11:51:27 PM »
What after market Cdi box should I buy so I don't have to cut it for de restricting my scoot. So I can put origanol back on for warranty purpuses
7
Agility 50 / Top 3 aftermarket brands
« on: October 28, 2012, 11:48:17 PM »
What is the top 3 aftermarket brands for buying upgraded parts
8
Agility 50 / Top 3 parts websites
« on: October 28, 2012, 11:46:40 PM »
What is the best stores to buy after market parts that ships to the US
9
Agility 50 / Torque speck on varaitor nut and clutch
« on: October 28, 2012, 01:59:48 AM »
What do you guys torque the varaitor and clutch nut.
10
Agility 50 / super trans kit eco Naraku
« on: October 27, 2012, 07:49:26 AM »
I have a 2013 agility 50 and it runs like crap. The dealer told me they need to do a tune up and oil change for 50$ at 300 km. I asked what the tune up will be, jetting the carb, adjusting fuel mixture screw and so forth.He replied by saying they don't need to be jetted and if I didn't get my oil services and tune ups done with them it would void my warranty which isn't true I called kymko USA. So I want to get a kit to get my bike to not run like shi?
. I am thinking about buying this kit and different jets to get my bike running smooth. Also a new cdi. My plane is to put all new kit when I derestrict the bike so if I have to take it in for warranty I can put the oem parts back on. Any thoughts
http://www.racingplanetusa.com/super-trans-naraku-4stroke-50cc-139qmb-p-20713-1.html?sessID=94a9a28a4e26d771d652a83aab6228ae
. I am thinking about buying this kit and different jets to get my bike running smooth. Also a new cdi. My plane is to put all new kit when I derestrict the bike so if I have to take it in for warranty I can put the oem parts back on. Any thoughts http://www.racingplanetusa.com/super-trans-naraku-4stroke-50cc-139qmb-p-20713-1.html?sessID=94a9a28a4e26d771d652a83aab6228ae
Pages: [1]