1
SOLD
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
People 250 / CVT transmission overhaul
« on: February 21, 2014, 04:41:55 PM »
My bike was idling a little rough and there's always noise coming from the transmission crank case. It doesn't affect the riding. Just very annoying when bike is idling. First I ordered a new transmission belt. After taking out the old belt, I realized that the old one and new one have different part number. Since I'm not the original owner, I'm not sure if it was original or replace incorrectly by previous owner. After the new belt, the bike idle much smoother. But during installation, I accidentally damage the pulley weight and probably something else. So I decide to replace all the CVT transmission including the pulley assembly and clutch assembly. Just got my parts last night and installed them. What a difference. Bike is in like new condition now. I always thought it was a clog up carburetor causing the idle issue. I'm just glad that everything is good now. My bike is a 2007 with 12,000 miles.
3
For Sale / SOLD: Kymco OEM Factory Gear Oil 180ML tube $10
« on: January 24, 2014, 07:28:38 PM »
Kymco OEM Factory Gear Oil 180ML tube. This will work for any Kymco scooter/motorcycle that require 180 ML gear oil exchange. Make the gear oil change such an easy job. Just cut the nose and squeeze the oil. Don't need to worry about measure the correct amount of gear oil or spill it every where while trying to pour it in a pea size hole.
4
People 250 / Trouble shoot engine sound - New video added
« on: September 23, 2012, 07:04:18 PM »
Update 11/06/12
I replaced the auto choke, bystarter and it fix the starting problem. The bike will start right up without throttle now.
Ever since I got my 2007 people s 250, I've been trying to identify the weird engine sound. I always need to give a little throttle to get it to start when the bike is cold. It will not idle stable. I've play with the idle screw, replaced the gas filter and spark plug. I also clean the carb. The battery is in good shape. The next thing I'm going to do is to replace the auto choke, bystarter. I've attached the video that has the engine sound. I was hoping someone can help me trouble the problem. Thanks.
New video added. Transmission case removed.
I replaced the auto choke, bystarter and it fix the starting problem. The bike will start right up without throttle now.
Ever since I got my 2007 people s 250, I've been trying to identify the weird engine sound. I always need to give a little throttle to get it to start when the bike is cold. It will not idle stable. I've play with the idle screw, replaced the gas filter and spark plug. I also clean the carb. The battery is in good shape. The next thing I'm going to do is to replace the auto choke, bystarter. I've attached the video that has the engine sound. I was hoping someone can help me trouble the problem. Thanks.
New video added. Transmission case removed.
5
People 250 / How to adjust High Beam angle on People S 250
« on: July 18, 2012, 01:46:48 PM »
I got my People S 250 about a month ago. Recently I found out that the headlight high beam's angle is too high. Anyone know how to adjust the angle of the high beam. Thanks.
6
Agility 125 / Kymco gear oil
« on: January 31, 2012, 03:09:08 AM »
I got the Kymco gear oil from Taiwan. It comes in a tube kind of like a tooth paste just not as long. It really helps on changing the gear oil where you don't have to worry about the measurement. All you have to do is cut the tip off and squeeze the whole tube. Wonder if you can fine the same thing in US.
7
Agility 125 / Agility 125 seat modification
« on: January 06, 2012, 08:28:18 PM »
I'm 6"1' and 186lb and found the seat too hard and slippery due to the slope of the seat and lack of foot rest space. Some scooters have foot rest space near the bottom of the handle bar. Unfortunately, there's nothing you can do about it. I've found some seat modification that just look like a seat of a maxi scooter. Has anyone done seat modification? Welcome to show your pictures here.
8
Agility 125 / Rough accelerating during take off
« on: September 18, 2011, 04:06:17 AM »
My agility 125 has a problem during take off from stop. It'll accelerate normally in low speed like 5 to 10 MPH then have a rough shaking engage in gear for about 1 to 2 second then go back to normal. It felt like the gear wasn't engaging smoothly but it's CVT and shouldn't have any gear. Once it get through roughness, everything is fine. It only happens during take off from stop. Anyone have the same problem and know how to fix it? Thanks.
Pages: [1]