« previous next »
Pages: [1]

Author Topic: Adjusting the Idle [VIDEO]  (Read 1017 times)

wkreps

  • Hero Member
  • *****
  • Posts: 831
    • View Profile
Adjusting the Idle [VIDEO]
« on: July 11, 2015, 12:11:14 PM »
Just a little diddy on how to adjust the idle (viewer requested).
Logged
Wayne


skishades

  • Point 'em and Pray
  • Full Member
  • ***
  • Posts: 118
    • View Profile
Re: Adjusting the Idle [VIDEO]
« Reply #1 on: October 23, 2015, 05:07:44 AM »
The idle is even easier with the seat pan out. My question is, does the carburetor have an air/fuel mix screw?
Logged
I will ski till Hell freezes over... then I will have no fear of death.

wkreps

  • Hero Member
  • *****
  • Posts: 831
    • View Profile
Re: Adjusting the Idle [VIDEO]
« Reply #2 on: November 30, 2015, 04:46:13 PM »
This is referred to as the pilot screw in the service manual. Same thing right? Has a cap over it and has a special head on the screw. If so, then yes it does.

Logged
Wayne


nix30101

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Adjusting the Idle [VIDEO]
« Reply #3 on: January 19, 2016, 02:11:46 AM »
what type of adaptor is used to adjust the air/mix screw?
Logged

wkreps

  • Hero Member
  • *****
  • Posts: 831
    • View Profile
Re: Adjusting the Idle [VIDEO]
« Reply #4 on: January 20, 2016, 02:04:03 AM »
Quote from: nix30101 on January 19, 2016, 02:11:46 AM
what type of adaptor is used to adjust the air/mix screw?
I think it is a "D" shaped screw driver but not sure. I have heard of people using a dremel tool to grind a notch into it and then just use a regular screwdriver. I would not be brave enough to try that as it may just break the head off alltogether. Maybe someone can chime in here with a little more definitive answer.
Logged
Wayne


An Error Has Occurred!

Call to undefined function split()
Back