Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - marioG

Pages: [1] 2
1
Agility 125 / Clutch problem or something else?
« on: March 25, 2012, 09:11:18 AM »
Hi guys!

Got some problem with idle and starting to move.

When clutch trying to kick in ive got some bumpy kicking...

3times i was disassemble it and first few miles was OK, then problem start to kick in.....

got no solution, picking at idle but why?

2
Technical | How To / Voltage regulator blown
« on: July 23, 2011, 11:41:20 AM »
wright in the middle of summer he just give up...

Has anyone try from other brands to fix this problem, as keeway and etc?



Can I put 14.5v and 20A, original is 14.5v and 12A?

3
Agility 125 / exhaust with broken cat
« on: July 19, 2011, 04:01:54 AM »
its sound like rattle inside...
but its more powerfull...
now its getting to 95kph (before was like 90 max)...
think that get rid of cat can be promising...
has anyone did that?

4
Technical | How To / leaking transmission oil
« on: July 03, 2011, 06:39:13 PM »
Still is leaking after 5000 km....i put too much oil into transmission...

now is bleeding....everytime...did something brake...

help?

5
Technical | How To / Agility fork bearings
« on: June 12, 2011, 12:44:12 PM »
there arent ballbearing...
has anyone tried this?


6
Technical | How To / Kymco agility rear bearings
« on: May 21, 2011, 01:09:22 PM »
Hi all,

need some info about rear driven pulley bearings:

http://kymcopartsonline.com/catalog/search_diagram_detail.php?s_fk_manufacturers_id=21&s_fk_model_year_id=1&s_fk_scooter_model_id=1&s_parts_diagram_id=10

part is 23200 and it a kit...but i need only bearings....outer driven pulley bearing

Anybody did this and know size of it....want to change outer and inner bearing...can pull it out but i think its gonna be broken...

im commuting each day to work and dont have much time to take it to somebody and i like to ride these days.....

7
Technical | How To / What will hapened if i put diferent rollers
« on: April 24, 2011, 07:31:21 PM »
im using malossi multivar and i have some problems finding 20x17 12g dr pulleys...

but i have found 21x17 12g dr pulleys on sip scootershop...

think this could be only 20.9x17 and difference is only .9mm, can i try them without scary toughts...?

my belt high point is 5mm bellow (lighter weights) and think this is limit for this size...


8
Agility 125 / bigger rollers 20 to 21
« on: April 17, 2011, 11:33:39 AM »
Has anyone try to put bigger rollers in variomatc?

found some cheap vespa 21x17 (ive got malossi 20x17).....

Can i put them on....?

Yaeh, im talking about dr pulley sliders.....fyi

9
Agility 125 / New mirrors
« on: April 09, 2011, 11:22:56 AM »
This koso mirrors are OK?

http://www.njuskalo.hr/moto-dijelovi-ostali/koso-sportski-retrovizori-oglas-2592105

Has anyone tried them?


10
Agility 125 / Pilot screw
« on: November 27, 2010, 05:21:27 PM »
Can anybody check how many turns from tight to loose is normal to pilot screw?

i think it about 3-3.5....

cant remember that.....damn changing oil and service....

11
Agility 125 / racing ignition coil
« on: November 06, 2010, 09:32:51 PM »
anyone try it...?

is there none gain in pt curve?

have some for 20$ to order - its naraku orange....

12
Agility 125 / engine power up
« on: October 24, 2010, 03:59:32 PM »
Need to know is anybody tried to install new carb, jet, filter or exhaust on gy6?

ive try with k&n open filter and 1.2 jet, but at 80km/h it just stopped accel..

bad, bad...

seems to me that exhaust cant take that much gases out of cilinder...too small output....

help

13
Agility 125 / Brake lever and parts
« on: August 14, 2010, 10:56:32 AM »
Need some parts for patching up my scoot...

Coz im in Croatia orig spare parts are much expensive and need to wait too long...and service...dont want to talk about that....

Im trying to get left brake lever, left end and left mirror.....hes anyone stumble on that?

on ebay, need part no. from rms or something like that....

Have big problem only for left brake lever, does anyone know if could i install lever from any other bike like yamaha.....tnx

14
Agility 125 / air mixture screw
« on: June 19, 2010, 12:42:42 PM »
can anyone check original place from tightened to lose..

ive got 1.75 turn....but it is too rich mixture, reading from plug...

15
Agility 125 / Malossi multivar instalation
« on: May 22, 2010, 05:40:53 PM »
Guys, need help...

Got M5111545 and its got one spacer....where does it go?

Yeah, instructions are crap...bloody malossi....

I think the spacer goes at the and before kick start thingy?




Pages: [1] 2