Offroad > MXU

Transmittion Problem MXU 300

(1/1)

bhuber28:
During our great Northwest snow I took out my 2006 MXU 300 to play in the snow. The quad only has 22 hours on it. While going round and round in the snow the transmittion or something would kick out of gear, come to a near stop and then grind its way back in. It will only do it if its in high gear. I have checked the shift rod and netural position and it is OK. Any one have any ideas??

Kent:
Hi!

I had similar problems. They were all caused by loosen bolt from here :
http://kuvablogi.com/nayta/1133811/

Shift fork had so much loose that it sometimes dropped gear of.

Intab:

--- Quote from: Kent on January 27, 2009, 07:38:04 PM ---Hi!what was wrong when high gear jumps

I had similar problems. They were all caused by loosen bolt from here :
http://kuvablogi.com/nayta/1133811/

Shift fork had so much loose that it sometimes dropped gear of.

--- End quote ---

yerbito:

--- Quote from: Kent on January 27, 2009, 07:38:04 PM ---Hi!

I had similar problems. They were all caused by loosen bolt from here :
http://kuvablogi.com/nayta/1133811/

Shift fork had so much loose that it sometimes dropped gear of.

--- End quote ---

Hi. Link doesnt work. Can you tell me more about that bolt?
Thanks you

Navigation

[0] Message Index