KymcoForum.com
Scooters - 50cc => Super 8 => Topic started by: JRowse on January 28, 2015, 07:30:37 PM
-
Hey guys, Could someone help tell me how to de-restrict the CDI on a super 8 2012 model.
-
Hey JRose, Welcome.
Wait for someone to verify this but I think it is a pink wire that gets cut on your CDI. Too many shots to the head so I forget a little.
Not to be a smart ass but while your waiting try searching S 8 derestrict here. It migh give you the answer.
-
Rev your bike on the center stand, does it hit a rev limiter? If not then it's de restricted already.
-
Hitting the rev limiter...
-
http://m.youtube.com/watch?v=vKb572Yo2aM (http://m.youtube.com/watch?v=vKb572Yo2aM)
Brappp
-
That kids funny. ;D ;D ;D
-
Yes it hits a rev limit. Also it does not have a pink wire that is the old model i believe. When it hits 35 mph it can not push any harder as it sounds like it is about to blow up. I have a kit, pipe, carb, i have clutches which are not on yet but will help but i know that there is a restrictor in the cdi i just do not know how to remove it.
-
I found an old thread here that might help. It a 2t people but the same as yours.
Do you have the green wire w/ a connector?
http://www.kymcoforum.com/index.php?topic=2150.0 (http://www.kymcoforum.com/index.php?topic=2150.0)
-
The super 8 isn't that easy! Also on the newer than 2007 people they took that easy derestriction wire off! Those dicks
-
Then I wonder if the s9 adapter module, and CDI would work?
Racing Planet has them for under 70 bucks I think
-
Hey guys, Could someone help tell me how to de-restrict the CDI on a super 8 2012 model.
The Super 8 2t 2012 CDI is not restricted and replacing it will not make your scoot faster.