KymcoForum.com
General => Technical | How To => Topic started by: de dee on September 26, 2017, 06:16:51 AM
-
;D ;D ;D bought a new top box from rev-zilla a bestem asked for lights with brakes, running lights, and turn sygnals, they sent ,. tail lights ,, and brake lights, only ,.with a wire harness for that alone,, so off to good old Canadian tire for 5 feet of LED light strip and a 5 wire flat plug in ,. cut a hole for the flat plug and stuck it in tight,. took the red reflecker cover off and installed the LED light strip in it, top row brakes middle row running lights and bottom row left and right turn lights, soldered the ground wires to a white wire, to the plug, then checking for power to the lights and soldered them to the plug,. to the trailer wire code,.
-
Well done dedee!
Have seen HD's with a box-like thing on the back ....with many lights. Stop, running ,turning.
Wish Bestem made smaller case with the lights.
The 929 with lights is a real bargain for safety!
Stig
-
De dee Canada's Bert Munroe with scoots!
Karl
-
Photos?
-
I , would also like to see some photos,please!!!
Rich
Sent from my iPad using Tapatalk
-
https://imgur.com/gallery/l2Jdv
:) :) :)
-
This guy gives a whole new meaning to the use of duck tape,,,as in quack quack. Reckon it would fix a hole in a piston??