« previous next »
Pages: [1]

Author Topic: KYMCO CRANK TOOL. LOCK RING  (Read 1740 times)

bobgolden66

  • Newbie
  • *
  • Posts: 1
    • View Profile
KYMCO CRANK TOOL. LOCK RING
« on: April 06, 2009, 11:42:26 PM »
DOES ANY ONE KNOW WHERE I CAN FIND THIS TOOL . (FOR LESS THAN $124.00!)

I HAVE A LOCK NUT ON THE CRANK SHAFT, HOLDING THE ONE WAY STARTER GEAR.  THE LOCK NUT IS APPROX 30MM IN DIA,  WITH FOUR SLOTS CUT INTO THE DIAMETER AT NINETY DEGREE INTERVALS.  THE EXPOSED CRANK SHAFT IS APPROX 3" LONG.  SO THE TOOL  NEEDS TO BE DEEP.

THANKS B.G.
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: KYMCO CRANK TOOL. LOCK RING
« Reply #1 on: May 03, 2009, 09:49:07 PM »
it's easy! find a piece of galvanized pipe of the right diameter. hold the pipe against the lock ring, and mark the material that has to be removed (from the pipe). you can use a bench grinder to remove . at the other end drill a 5/16 hole through which you can use a hefty phillips screw driver for leverage. hope you get the concept. good luck
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

tp376

  • Newbie
  • *
  • Posts: 21
    • View Profile
Re: KYMCO CRANK TOOL. LOCK RING
« Reply #2 on: June 05, 2009, 03:40:55 PM »
If that does not work, I am pretty sure I can get you one.  Not sure of the cost though.  If interested let me know and Ill see what I can do.
Logged
Certified Kymco Tech willing to give Free help.

An Error Has Occurred!

Call to undefined function split()
Back