KymcoForum.com
Scooters - 50cc => Super 9 => Topic started by: Kymco Super 9lc on October 04, 2017, 08:22:14 PM
-
Hello,
I have problem. I dont got spark, coil is fine spark plug to magento stuff same. But my immobiliser box was burnt down. When turning engine i feel burn smell, from box open it up and its all melt. Maybe i can connect some immo wires to get spark back? Or just buy new immo? Please help what to do?
https://www.upload.ee/files/7525250/kymco.PNG.html (https://www.upload.ee/files/7525250/kymco.PNG.html) https://www.upload.ee/files/7525255/kymco2.PNG.html. (https://www.upload.ee/files/7525255/kymco2.PNG.html.) box location https://www.upload.ee/files/7525314/box.PNG.html (https://www.upload.ee/files/7525314/box.PNG.html) Added some pictures to, look those mayby then you understand my bad english :D.
Greetings
-
sorry, not sure what part is damaged, but I suggest replacing damaged part. do you know why go hot and melted?
-
sorry, not sure what part is damaged, but I suggest replacing damaged part. do you know why go hot and melted?
Hi not sure why its burned, but i GOT spark BACK, i made straight wiring, but thats not powering headlights and loading battery. Need to bybass immo witth old wiring
-
Looks like the fuse box from your pictires. Is it the fuse box?
Karl
-
Is it an aftermarket alarm system ??
-
The factory service manual does not show anything like that. Looks like someone wired an alarm in.
-
yes i think its alarm, i had speaker to, removed that, but without that box i dont have spark. Now im drivng around with stright wiring connected wires stright to cdi and puted a kill switch, but i dont got a light, battery loading nothing. Does someone now how to remove alarm from wiring ?
-
Search on web "how to wire scooter alarm system", should give some ideas on how to disable. Good luck!
-
I think this is the right wiring diagram. No spark is possibly a ground wire. Just look at what wires come in and go out. See what they splices.
(https://i.imgur.com/iu3Txdv.gif)