Author Topic: strange loose cord/wire harness  (Read 2166 times)

zevsdad

  • Jr. Member
  • **
  • Posts: 94
    • View Profile
strange loose cord/wire harness
« on: December 11, 2015, 01:58:53 PM »
Hello! I was poking around the bottom of my scoot last night, trying to see if I could find any answers to the strange paper crunching/light backfiring noise I keep hearing from the right side when I first accelerate. I noticed this wire kind of loose-not connected to anything. Got aout the flashlight and discovered that it is part of the cord that connects to the kick stand so that the scoot cant start if the kick stand is down. So there is one cord that branches into 2 in a Y-one plugs into the kick stand, the other is just kind of dangling with nowhere to go. Seems wierd to me so I took a pic--anyone know if this is supposed to be going somewhere else?


Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14224
  • Rural Ohio
    • View Profile
Re: strange loose cord/wire harness
« Reply #1 on: December 12, 2015, 01:02:42 AM »
Probably should be plugged in somewhere!
Easiest answer would come from a fellow owner taking a look.
Failing that here is a similar wiring harness diagram.

Stig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7723
  • West Tennessee, USA
    • View Profile
Re: strange loose cord/wire harness
« Reply #2 on: December 12, 2015, 02:47:53 AM »
See the unused two-wire plug (green) next to the side stand switch on Stig's diagram? Empty from factory! For some feature we don't have.

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

yao

  • Jr. Member
  • **
  • Posts: 70
    • View Profile
Re: strange loose cord/wire harness
« Reply #3 on: December 12, 2015, 04:11:24 PM »
I have the same plug that is unplugged too, probably have no function for us model.

pipster326

  • Sr. Member
  • ****
  • Posts: 358
    • View Profile
Re: strange loose cord/wire harness
« Reply #4 on: December 12, 2015, 04:14:18 PM »
Hey guys, I also have one on my downtown 300. I'm guessing that its for an upgrade or aftermarket accessories . Haven't figured it out yet


Sent from my iPad using Tapatalk

de dee

  • Hero Member
  • *****
  • Posts: 2055
  • 2011 300i downtown 82,265 KM.
    • View Profile
Re: strange loose cord/wire harness
« Reply #5 on: December 12, 2015, 09:16:04 PM »
plug a meter in it and try all the switches, to see what it does,

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7723
  • West Tennessee, USA
    • View Profile
Re: strange loose cord/wire harness
« Reply #6 on: December 13, 2015, 01:23:07 AM »
Both wires are green and are hooked to the same spot. Should both be 12 volts with ignition switch on.

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

de dee

  • Hero Member
  • *****
  • Posts: 2055
  • 2011 300i downtown 82,265 KM.
    • View Profile
Re: strange loose cord/wire harness
« Reply #7 on: December 13, 2015, 01:54:52 AM »
is that 12 volt with ign. on and off

agilebda

  • Sr. Member
  • ****
  • Posts: 394
    • View Profile
Re: strange loose cord/wire harness
« Reply #8 on: December 14, 2015, 03:27:47 PM »
Looks like the stand cord. Or it could be the loose wire for the Computer (dealer computer for servicing). I have my scoot stripped down to bare frame and harness and I will confirm this with you tonight.

agilebda

  • Sr. Member
  • ****
  • Posts: 394
    • View Profile
Re: strange loose cord/wire harness
« Reply #9 on: December 15, 2015, 08:24:39 PM »
I just checked my stripped down GTI. If it's a green,black,and white wire, it belongs inside the battery compartment to plug in the diagnostic tool which the dealers use. ;) It may or may not be those color wires depending on the year model of your bike.

Cheers

An Error Has Occurred!

Call to undefined function split()