KymcoForum.com

Motorcycles => Venox 250 => Topic started by: venoxboy250 on October 19, 2011, 02:08:42 PM

Title: need help
Post by: venoxboy250 on October 19, 2011, 02:08:42 PM

i just bought a venox 250 nice  bike but wont start he said it was the cdi box where can i get one looked every where    ....thanks for helping
and how many carbs does it have

Title: Re: need help
Post by: SteveM on October 19, 2011, 09:23:39 PM

I can't help with your non-starting issues, but the bike uses dual Keihin carbs.

Title: Re: need help
Post by: venoxboy250 on October 20, 2011, 02:21:03 AM

thanx

Title: Re: need help
Post by: anton734 on October 20, 2011, 12:42:56 PM

You could order a pdf manual on ebay for around 10 bucks. It will have all the info in the trouble shooting section and in a detailed section on the CDI testing. Hope this info helpful.

Title: Re: need help
Post by: JustWantToRide on October 20, 2011, 10:29:27 PM

$150 at kymcoparts123.com

http://www.kymcoparts123.com/pages/OemParts?aribrand=KYM#/s/KYM/venox/cdi/1 (http://www.kymcoparts123.com/pages/OemParts?aribrand=KYM#/s/KYM/venox/cdi/1)


If it wasn't running when you bought it then don't expect what the seller said to be true.  If they knew what was wrong they would have fixed it.  Check what you can before you go and buy a new CDI.  Is it getting gas, is it sparking, are the plugs clean, is the battery charged, is the fuel too old, do the carbs need cleaning...

Title: Re: need help
Post by: venoxboy250 on October 24, 2011, 03:55:54 PM

yes it was the cdi box