KymcoForum.com
Scooters - 125 to 300 => Downtown 300 => Topic started by: Nireen on September 12, 2017, 01:22:25 PM
-
I want to shut of the oil light. How to? :) THANKS!
-
I want to shut of the oil light. How to? :) THANKS!
Same as resetting the trip meter. But you do it when the display is the odometer.
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hmmm I never set trip meter :/
Same as resetting the trip meter. But you do it when the display is the odometer.
Sent from my HUAWEI VNS-L31 using Tapatalk
-
A trip meter, B trip meter, oil change meter hold outside buttons till it resets,. right button to change from a to b to oil change to odometer
-
Alternatively, take a one inch square piece of black electrical insulating tape and stick over offending warning light and.......voila! Problem solved.
-
Alternatively, take a one inch square piece of black electrical insulating tape and stick over offending warning light and.......voila! Problem solved.
cant do that ! it is too easy,.
-
I was gonna do that LOL!!!!!!!
cant do that ! it is too easy,.
-
OK so have three buttons. The two outside one's you mean? Hold until what?
A trip meter, B trip meter, oil change meter hold outside buttons till it resets,. right button to change from a to b to oil change to odometer
-
Kat got it! :D thanks everyone ♥
-
Now you can do a Utube thingie on how to cancel the oil light. I can't wait
-
sh** i didn't pay attention to well! LOL
Now you can do a Utube thingie on how to cancel the oil light. I can't wait
-
sh** i didn't pay attention to well! LOL
Well then... You're fired . ;)
-
LOL OK if someone tells me how to put the light back on I will figure it out and do a video :D
Well then... You're fired . ;)
-
The ECU knows how many miles have elapsed since the last time the service light was reset.
It lights up once the recommended service interval mileage has passed (on the Xciting 250, for example, it is 1200 miles).
Once the warning has been reset, it starts over at 0.
If the light is on, you should change the oil. It doesn't have to be a drop-everything-now-and-do-it type of thing, it can wait a week or two.
Once the oil is changed, reset the lamp. You should also check your user manual to see when the transmission oil needs to be changed; they typically are changed at the same time, but there is no light for this.
This way you never destroy your drive train because you forgot to change the oil.