16
Agility 50 / Bendix
« on: June 13, 2017, 07:43:55 PM »
Bike was running fine last season. Now the bendix seams to not turn the flywheel. Any idea?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
Agility 50 / where are the bearings
« on: June 02, 2017, 02:19:49 PM »
OK so when trying to start the bike there is a grinding noise.but when freely spinning the rear wheel the bike is off there is no noise and spins smoothly.
any ideas what's going on here?
any ideas what's going on here?
18
Agility 50 / Re: Omg..cdi's for Kymco Agility 50
« on: May 29, 2017, 01:23:00 AM »
I too have a DC cdi. I went through many cdis and none worked. stick with the original factory model it cost me $80 but it works.
19
Super 8 / winding grinding
« on: May 27, 2017, 09:36:11 PM »
so
the bike was sitting all winter. started up fine no noise no trouble but the first drive I heard a high winding/grinding noise that increase in pitch as I accelerated then suddenly pinged then it died. come to find out if also drained my battery. after charging the battery and attempting to start the bike there is a low tone grinding noise that I can also feel. asks the bike won't turn over. it's not the starter or bendex they were removed and tested.
the bike was sitting all winter. started up fine no noise no trouble but the first drive I heard a high winding/grinding noise that increase in pitch as I accelerated then suddenly pinged then it died. come to find out if also drained my battery. after charging the battery and attempting to start the bike there is a low tone grinding noise that I can also feel. asks the bike won't turn over. it's not the starter or bendex they were removed and tested.
20
Like 50 2T / winding noise killed it?
« on: May 27, 2017, 09:35:29 PM »
so
the bike was sitting all winter. started up fine no noise no trouble but the first drive I heard a high winding/grinding noise that increase in pitch as I accelerated then suddenly pinged then it died. come to find out if also drained my battery. after charging the battery and attempting to start the bike there is a low tone grinding noise that I can also feel. asks the bike won't turn over. it's not the starter or bendex they were removed and tested.
the bike was sitting all winter. started up fine no noise no trouble but the first drive I heard a high winding/grinding noise that increase in pitch as I accelerated then suddenly pinged then it died. come to find out if also drained my battery. after charging the battery and attempting to start the bike there is a low tone grinding noise that I can also feel. asks the bike won't turn over. it's not the starter or bendex they were removed and tested.
21
Agility 50 / Re: very high winding nose
« on: May 19, 2017, 09:23:39 PM »
so just to recap here.
the bike was sitting all winter. started up fine no noise no trouble but the first drive I heard a high winding/grinding noise that increase in pitch as I accelerated then suddenly pinged then it died. come to find out if also drained my battery. after charging the battery and attempting to start the bike there is a low tone grinding noise that I can also feel. asks the bike won't turn over. it's not the starter or bendex they were removed and tested.
the bike was sitting all winter. started up fine no noise no trouble but the first drive I heard a high winding/grinding noise that increase in pitch as I accelerated then suddenly pinged then it died. come to find out if also drained my battery. after charging the battery and attempting to start the bike there is a low tone grinding noise that I can also feel. asks the bike won't turn over. it's not the starter or bendex they were removed and tested.
22
Agility 50 / Re: very high winding nose
« on: May 18, 2017, 06:06:39 AM »
update
the belt is fine. when I try to start the bike there is a heavy grinding sound. I took the starter out to test it and the starter spins fine. put it back in. same grinding noise. I'm suspecting bearings. but not 100%. any thoughts?
the belt is fine. when I try to start the bike there is a heavy grinding sound. I took the starter out to test it and the starter spins fine. put it back in. same grinding noise. I'm suspecting bearings. but not 100%. any thoughts?
23
Agility 50 / Re: very high winding nose
« on: May 09, 2017, 11:24:29 PM »
here's something else too. I can hear the grinding sound when I attempt to start the bike again too. so that is something new.
24
Agility 50 / Re: very high winding nose
« on: May 09, 2017, 09:20:37 PM »
the winding nose came from the engine compartment I believe it may have been the gear box
25
Agility 50 / grinding noise
« on: May 08, 2017, 10:30:04 PM »
after fixing the carb I took it for a ride of course. half way down the road I heard a high winding nose then it went dead. won't start now similar to the battery being dead. only clicks. anyone know what I broke?
26
Agility 50 / Re: hmmm
« on: May 08, 2017, 10:27:26 PM »
cleaned all the jets that was the carb problem it started right up.
27
Agility 50 / Re: hmmm
« on: May 08, 2017, 07:11:24 PM »
OK update although the line from the gas tank to carb is accessing fuel. there is no fuel in my carb bowl. hmm
28
Agility 50 / Re: hmmm
« on: May 08, 2017, 04:13:25 PM »
after further inspection I took off the carb and sprayed starting fluid directly into the intake. it started! now I just gotta figure what part of fueling system did fail. I can see the carb is getting gas so the issue may be the components of the carb itself. hmmm
29
Agility 50 / Re: hmmm
« on: May 08, 2017, 03:38:24 PM »
as suggested I tested the compression and I can clearly feel that there is compression. the carb is relatively new bought it last year. like I said it just died while riding. engine cranks but doesn't start. Idk
thanks for the help though
thanks for the help though
30
Agility 50 / Re: Scooter keeps stalling
« on: April 26, 2017, 04:31:00 PM »
yup I would guess the idler screw. also since you changed the carb, double check the vacuum lines.