Scooters - 125 to 300 > Downtown 300

FXTUL M3 - motorcycle diagnostic tool for 60 USD - works with Downtown 300i !

(1/6) > >>

Ericson:
I just received FXTUL M3 motorcycle diagnostic tool. I got version that is design to be used Kymco,  Sym and Yamaha motorcycles. I have 2011 DT300i with ABS. I can confirm that it connects to ECU and ABS modules.  You are able do usual diagnostic stuff like viewing past faults, clearing faults and viewing live data.

Before that I tried using OBD2 Bluetoth dongles with prices ranging from 10 USD to 50 USD but none of them was able to connect to ECU. This tool costs 60 USD with free shipping which I think is very good value for money as you are getting cables for all 3 scooter brands. Orginal Kymco diagnostic tool is in range of 300-400 USD.

You can watch tool in action here : https://youtube.com/shorts/yUG2fBH92K4

More data here https://fxtul.com/

Ruffus:
Txs alot, interesting!
Would you check it please and give a short feedback what can be done with this diagtool?

CROSSBOLT:
Looks better than the Kymco tool at 200 bucks! So, where does one find one of these?
I venture a guess if it works on DT300i ECU EFI it will work on all Kymcos with EFI and that little three wire plug.
Does this have cable adapters to fit nearly anything?

Stig / Major Tom:
Is it this?


https://www.ebay.com/itm/374553805652?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1NJCc1sKFT_afUgDjVfG_UA20&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=374553805652&targetid=1644837435723&device=m&mktype=pla&googleloc=9015855&poi=&campaignid=20398863052&mkgroupid=157274709968&rlsatarget=pla-1644837435723&abcId=9317264&merchantid=6296724&gclid=CjwKCAjwivemBhBhEiwAJxNWN9gcHIQL_1HO1PJweoG2UiokoBpLQ7rbJYFfqs6HrIliha-xgaUTvBoCT2QQAvD_BwE

Stig

Ericson:

--- Quote from: Ruffus on August 17, 2023, 09:04:59 PM ---Txs alot, interesting!
Would you check it please and give a short feedback what can be done with this diagtool?

--- End quote ---

Yesterday I cleared old, non-active, fault codes from ABS module. Checked ECU for current and stored errors - none reported. Watched live engine data by graph and numbers. You can also perform TPS reset using this tool.


--- Quote from: CROSSBOLT on August 17, 2023, 09:21:35 PM ---So, where does one find one of these? I venture a guess if it works on DT300i ECU EFI it will work on all Kymcos with EFI and that little three wire plug.
Does this have cable adapters to fit nearly anything?

--- End quote ---

You can find this tool on several places:

https://fxtul.com/
ebay
Aliexpress

Depending on version you order ( there are three versions ) you get all the cable adapters



--- Quote from: Stig / Major Tom on August 17, 2023, 11:43:05 PM ---Is it this?


https://www.ebay.com/itm/374553805652?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1NJCc1sKFT_afUgDjVfG_UA20&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=374553805652&targetid=1644837435723&device=m&mktype=pla&googleloc=9015855&poi=&campaignid=20398863052&mkgroupid=157274709968&rlsatarget=pla-1644837435723&abcId=9317264&merchantid=6296724&gclid=CjwKCAjwivemBhBhEiwAJxNWN9gcHIQL_1HO1PJweoG2UiokoBpLQ7rbJYFfqs6HrIliha-xgaUTvBoCT2QQAvD_BwE

Stig

--- End quote ---

Not quite - it is version for Honda Kawasaki Yamaha. Look for version for Kymco, SYM, Yamaha.

Navigation

[0] Message Index

[#] Next page

Go to full version