KymcoForum.com
Scooters - 50cc => Like 50 2T => Topic started by: paceneedsstides on November 29, 2015, 11:55:31 PM
-
Ok I'm still waiting on my Chrome Next R pipe from Scooter Attack but I have $200 more to spend before I have to wait a few months for more mods. So I am thinking about getting the Malossi Multivar P/N 519988, Maloss red contra spring, Some rollers for now (sliders later) at 7.5 and 7g, and some jets to help tune new pipe.
So I have a few questions.
First is this a good list or is there another route to go with a $200 budget.
Second are the roller weights good to start or should I go lighter/heavier.
And third I'm running stock derestricted so smooth bushing and 82 main jet but otherwise stock what size jets should I expect to have to run with new parts and pipe on stock cylinder and carb. I figure I'll just buy a 10 jet set but need a ballpark to start with.
I want the Malossi 19mm carb but thats probably gonna have to wait 6 months or so.
-
Well since I got no input to say otherwise I guess this is what I'll be going with in the nest day or so will post exactly what I am able to get after christmas presents are bought.
-
Ok so went a tiny bit over but got the carb too.
------------------------------------------------------
1 x Malossi Variator for Kymco 2 Stroke Scooters (M519988) = $69.97
1 x Malossi CARBURETOR KIT PHBG 19mm Kymco, Genuine 50 2T (M1611028) = $114.93
1 x Malossi MHR Blue Contra Spring, +106% Stiffness (M298325.A0) = $14.97
1 x Malossi Torsion Controller for Honda, Kymco, Vespa, Piaggio 50cc (M2512828) = $7.97
1 x DR. Pulley 16x13 Slider Weights (SR1613/6) = $19.77
Grams 8.0
------------------------------------------------------
Sub-Total: $227.61
Flat Rate (Best Way): $7.99
Total: $235.60
-
oh forgot to add 15.75 I think after shipiing. for 90s range main jets from treatland. That bring it to about $250 for everything but I feel I got a good deal and for the time being don't plan on any other performance mods for at least 6 months or so.
-
Ok so went a tiny bit over but got the carb too.
------------------------------------------------------
1 x Malossi Variator for Kymco 2 Stroke Scooters (M519988) = $69.97
1 x Malossi CARBURETOR KIT PHBG 19mm Kymco, Genuine 50 2T (M1611028) = $114.93
1 x Malossi MHR Blue Contra Spring, +106% Stiffness (M298325.A0) = $14.97
1 x Malossi Torsion Controller for Honda, Kymco, Vespa, Piaggio 50cc (M2512828) = $7.97
1 x DR. Pulley 16x13 Slider Weights (SR1613/6) = $19.77
Grams 8.0
------------------------------------------------------
Sub-Total: $227.61
Flat Rate (Best Way): $7.99
Total: $235.60
Let us know how it turns out. Are you going to install one thing at a time and test or do them all at once? I'm mostly curious about the Variator and the torsion controller.
-
it's all been installed look for threads in tech section