I'm new here and hope someone can point me in the right direction!
We have bought our son an old 50 mxer and I need some help setting the carb up properly.
The carb is a Keihin "KT" with auto choke. There are two adjuster screws on the left-hand side of the carb body which I'm guessing are the mixture and tickover settings.
Is there a "standard" setting for these i.e. "screw in fully then back off 3 turns" ...
We're having a real headache getting it to run properly and I want to get everything back to "factory" before trying anything else!
If there's some info that would help, just shout
Thanks to all,