Author Topic: Top box trunk rattle. How to fix?  (Read 218 times)

DaxFX

  • Newbie
  • *
  • Posts: 6
    • View Profile
Top box trunk rattle. How to fix?
« on: August 26, 2017, 08:51:51 AM »
Hi guys, I hate the rattle in the top box i was thinking on put some foam tape but not sure what to do. What you guys are doing to get rid of the rattle? What size of tape will fit in the channels ?

Thanks!

ole two wheels

  • ole two wheels
  • Hero Member
  • *****
  • Posts: 633
    • View Profile
Re: Top box trunk rattle. How to fix?
« Reply #1 on: August 26, 2017, 07:03:47 PM »
Hello DaxFx and welcome to best scooter forum on the web.When I've had this happen to me, I backed off on the mounting bolts and cut some pieces from a 1/16th inch piece of black rubber and slid them up under the rear of the top box and then re tightened the bolts. Worked for me. You might even cut out four ribber washers and place them on all for bolts between the bottom of the box and the mounting surface. Hope this helps.
Mac 

2012 Kymco DT300
1996 Honda Shadow Spirit 1100

DaxFX

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Top box trunk rattle. How to fix?
« Reply #2 on: August 30, 2017, 11:28:19 AM »
Hello DaxFx and welcome to best scooter forum on the web.When I've had this happen to me, I backed off on the mounting bolts and cut some pieces from a 1/16th inch piece of black rubber and slid them up under the rear of the top box and then re tightened the bolts. Worked for me. You might even cut out four ribber washers and place them on all for bolts between the bottom of the box and the mounting surface. Hope this helps.
Thanks. I will try this and let you know.

stuo

  • Full Member
  • ***
  • Posts: 130
    • View Profile
Re: Top box trunk rattle. How to fix?
« Reply #3 on: November 08, 2017, 11:32:39 AM »
Home Depot has a variety of cheap stick-on foam weather stripping in different thicknesses.
GV 250
P 250
DT 300i
Vino 50
R1100RT (BMW)

TLRam1

  • Sr. Member
  • ****
  • Posts: 375
    • View Profile
Re: Top box trunk rattle. How to fix?
« Reply #4 on: November 11, 2017, 11:50:05 PM »
I used foam weather stripping in the channels of my Shad case, it worked.
Terry
10 Kymco People S 250
87 Yamaha Riva 200 (Sold)
Allen TX (Dallas)
cli-maxridinggear.com

NOCO Genius