Author Topic: Polini clutch, anyone?  (Read 2192 times)

MJR

  • Hero Member
  • *****
  • Posts: 1141
    • View Profile
Re: Polini clutch, anyone?
« Reply #15 on: April 19, 2017, 01:06:39 PM »
You need a special tool for the CVT tho.

If you are talking about a clutch holder you can make one with some metal bar and bolts.

'03 Clipper Yellow Honda Reflex
'03 Coast Cyan Atlantic 500
'14 White MyRoad 700i
'09 Mirage White Burgman 650
'06 Oort Gray Burgman 650 project
'05 Sonic Silver Burgman 650 project
'03 Space Blue Burgman 650, rebuilt/upgraded CVT w/Polish adapter
'03 Space Blue Burgman 650 parts bike

sissymary

  • Jr. Member
  • **
  • Posts: 70
    • View Profile
Re: Polini clutch, anyone?
« Reply #16 on: April 24, 2017, 01:31:53 PM »
I bought an electric impact wrench years ago at harbor freight for about $40.00 Works perfect. Zips on and off clutch and variator in seconds. No need for any holding tools. :-*

MJR

  • Hero Member
  • *****
  • Posts: 1141
    • View Profile
Re: Polini clutch, anyone?
« Reply #17 on: April 24, 2017, 02:13:30 PM »
I bought an electric impact wrench years ago at harbor freight for about $40.00 Works perfect. Zips on and off clutch and variator in seconds. No need for any holding tools. :-*

For removing an impact is fine but it could over torque putting it back on so a holder and torque wrench is recommended.
'03 Clipper Yellow Honda Reflex
'03 Coast Cyan Atlantic 500
'14 White MyRoad 700i
'09 Mirage White Burgman 650
'06 Oort Gray Burgman 650 project
'05 Sonic Silver Burgman 650 project
'03 Space Blue Burgman 650, rebuilt/upgraded CVT w/Polish adapter
'03 Space Blue Burgman 650 parts bike

sissymary

  • Jr. Member
  • **
  • Posts: 70
    • View Profile
Re: Polini clutch, anyone?
« Reply #18 on: May 11, 2017, 01:50:09 PM »
Mine is not powerful enough to do that. It is not a shop compressed air unit. Has worked many times with no issues. I would put some medium strength lock tight on the threads before install also. Make sure it is good for heat areas. As varo gets pretty hot. Let set up over night before starting. Do not use red permanent lock thread. :-*

An Error Has Occurred!

Call to undefined function split()