Author Topic: malossi var.  (Read 1919 times)

refrig

  • Newbie
  • *
  • Posts: 11
    • View Profile
malossi var.
« on: August 29, 2016, 12:45:26 AM »
 Ordered a new malossi M519988. I know about not using the spring included. Is the steel washer used?

chaz35

  • Hero Member
  • *****
  • Posts: 711
  • old guy
    • View Profile
Re: malossi var.
« Reply #1 on: August 29, 2016, 03:38:16 AM »
I think you're referring to the bushing, approx 2" long?, yes it's used.  Good luck.
1st and 2nd usually have an unfair advantage.  3rd is usually the best, can learn the most from.  paraphrased from Don Quixote, over 400 years ago, still true today

refrig

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: malossi var.
« Reply #2 on: August 29, 2016, 04:59:53 PM »
 Not the drive bushing. It is black about 1"in dia. and 1/4" thick

chaz35

  • Hero Member
  • *****
  • Posts: 711
  • old guy
    • View Profile
Re: malossi var.
« Reply #3 on: August 29, 2016, 09:14:00 PM »
The black plastic piece is not used.  I think it's a restriction, would keep the variator from closing completely, limit top speed.  If you are not referring to the bushing, I don't know what washer you are referring too.  Can you post a pic?
1st and 2nd usually have an unfair advantage.  3rd is usually the best, can learn the most from.  paraphrased from Don Quixote, over 400 years ago, still true today

paceneedsstides

  • Hero Member
  • *****
  • Posts: 653
  • Cuz I can't drive...55!!...No I mean that I try...
    • View Profile
Re: malossi var.
« Reply #4 on: August 31, 2016, 07:43:24 PM »
take a pic of washer I don't remember mine coming with one
2013 Kymco/Malossi Like 70 2T
Technigas Next R Chrome exhaust
Malossi Dellorto 19mm Carb
94 main jet
Malossi Multivar
Dr Pulley 6gr Sliders
Malossi Blue Rear Pulley Spring
Malossi Torsion controller
Stage 6 Sport Pro Clutch
Stage 6 upgear kit
Malossi PHBG Open Racing Filter Chrome Covered

Dabby-D

  • Newbie
  • *
  • Posts: 23
    • View Profile
Re: malossi var.
« Reply #5 on: June 20, 2017, 07:13:58 PM »
Should have Gone Dr.Pulley and sliders. Malossi is over rated..... was not happy with paying so much for the 19mm carb to find out that the exact same dellorto "black racing edition" PHGB had a better throttle adjustment and better manual shutoff, and was 1/2 the cost. the rollers flatten out and just are not as good as sliders. the ramps are improved on the malossi because the ramps dont have flat spots which makes rollers last longer, but damn. Over rated..... And for a clutch I prefer the design of stage6 R/T then the Malossi MHR. I prefer the naraku Torque shim over the Malossi Torque shim, the list kinda goes on..... But i realize now that all these components arent for the person who knows what they are buying and how to tune, its for plug and play and people with limited knowledge. Im fortunate to be able to see the different builds and setups to determine what works for me.
2005 Super 9 LC - Airsal (T6) 73.8cc BBK
Battery: Chromes-Pro I-gel w/ self tester & LCD
Stator:(soon) Artek K2 rotor w/light
cooling:(soon) Bosh 12v water pump
Carb: 19mm PHGB (soon)Yoshimura 24
Air filter: Malossi E5 chrome
Variator: Malossi - Clutch: Malossi MHR Delta
Exhaust: technigas Next-R

An Error Has Occurred!

Call to undefined function split()