Author Topic: B&W shudders at low speed  (Read 1109 times)

RickEEE

  • Newbie
  • *
  • Posts: 7
    • View Profile
B&W shudders at low speed
« on: July 22, 2016, 11:34:32 AM »
My 150 shudders when starting out from a stop. Its like the CVT is partly grabbing and slipping on the belt, causing a jerking sensation. Its progressively gotten worse. It has about 9000 km on it, so am thinking it is time for a new belt. Will check specs on it this weekend. Any other suggestions?

Stig

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5398
    • View Profile
Re: B&W shudders at low speed
« Reply #1 on: July 22, 2016, 04:36:22 PM »
Remove cvt cover and clutch bell....deglaze clutch pads with fine sandpaper.
See if this cures take-off shudders.

Stig
2012 KYMCO LIKE200iLX
2018 Piaggio Liberty 150S

wkreps

  • Hero Member
  • *****
  • Posts: 816
    • View Profile
Re: B&W shudders at low speed
« Reply #2 on: August 04, 2016, 11:43:06 AM »
Remove cvt cover and clutch bell....deglaze clutch pads with fine sandpaper.
See if this cures take-off shudders.

Stig
Exactly what I was thinking. Stig, you're clairvoyant.
Wayne