Author Topic: carbueretor - rubber boot - whats is function?  (Read 791 times)

Ian7

  • Newbie
  • *
  • Posts: 26
    • View Profile
carbueretor - rubber boot - whats is function?
« on: January 01, 2015, 07:08:44 PM »
My 2013 super8 2T has a loose fitting rubber boot around the outside of the carb, it mostly just gets in the way ....

Does it have any true function, or just something the lawyers and/or EPA demanded and can therefore be discarded?

thanks

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: carbueretor - rubber boot - whats is function?
« Reply #1 on: January 01, 2015, 08:10:18 PM »
The real purpose is to keep the heat around the carb for cold weather. Depending on your climate you should have no issues taking it off. They really do get in the way haha. There's a rubber hose coming from the cooling shroud, make sure you leave that facing the carb bowl so it still gets a little heat.
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

Mike Florek

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: carbueretor - rubber boot - whats is function?
« Reply #2 on: March 04, 2015, 07:41:05 PM »
It has another function, as an inhibit.  U.S. EPA wants manufacturers to make it difficult for end-users to modify any settings.

An Error Has Occurred!

Call to undefined function split()