« previous next »
Pages: [1]

Author Topic: Add LED lights  (Read 1262 times)

GBBBiker

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
Add LED lights
« on: July 25, 2014, 03:25:42 PM »
I want to add led lights to my Grandvista. A tail light/ brake light combo to the back of the back seat rest. LED strips to the side and back. I sthere an easy way to access the wiring without removing body panels? Any help appricated.
Logged

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Add LED lights
« Reply #1 on: July 25, 2014, 03:44:56 PM »
Just with the seat bucket out you should be able to access the tail light connector.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

GBBBiker

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
Re: Add LED lights
« Reply #2 on: July 27, 2014, 12:38:55 AM »
 ;)Thanks for the tip.
Logged

GBBBiker

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
Re: Add LED lights
« Reply #3 on: July 27, 2014, 08:08:41 PM »
I looked at the seat bucket and could not figure how to remove it.
Logged

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Add LED lights
« Reply #4 on: July 27, 2014, 09:17:53 PM »
4 10mm bolts under the carpet. Should pull right out after that.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

Urbestfriend

  • Sr. Member
  • ****
  • Posts: 430
    • View Profile
Re: Add LED lights
« Reply #5 on: July 28, 2014, 12:08:08 PM »
Probably will have to remove battery and access plate behind it to access light harness.
Logged

An Error Has Occurred!

Call to undefined function split()
Back